NEO-TEC NCS6200 20 inch 62CC Chainsaw: In-Depth Review and Customer Opinions

to the NEO-TEC NCS6200 Chainsaw

NEO-TEC is a newer brand that specializes in outdoor power equipment like chainsaws, lawn mowers, and trimmers. The NEO-TEC NCS6200 is their flagship chainsaw model designed for demanding residential and commercial use.

This 20-inch gas-powered chainsaw packs impressive specs and power while remaining lightweight and maneuverable. With a robust 62cc 2-stroke engine, pro-grade 20-inch bar and chain, and tool-less chain tensioning system, it's built to take on tough cutting jobs in yards and on worksites.

The NCS6200 combines productive cutting capacity with easy handling, making it a versatile option for property owners, landscapers, tree care pros, and construction crews. Keep reading to learn about the key features and capabilities of this chainsaw.

Design

The NEO-TEC NCS6200 chainsaw features a rugged yet lightweight design perfect for regular use around the home or farm. At 20 inches in length, the NCS6200 provides ample reach for most cutting tasks without being overly large or unwieldy.

Despite its 20-inch bar, the total weight tips the scales at just 12 pounds - making this saw easy to maneuver and comfortable to use for extended periods. This reduced weight comes from a combination of a lightweight magnesium crankcase and a compact 62cc 2-stroke engine. The ergonomic rear handle and adjustable front grip further enhance the comfort and control when operating this saw.

Overall, the dimensions and weight of the NEO-TEC NCS6200 make it an ideal choice for a mid-sized, all-purpose chainsaw capable of taking on a variety of cutting jobs. The balance of power, reach and portability hit the sweet spot desired by many homeowners and landowners looking for a primary chainsaw.

Engine

The NEO-TEC NCS6200 chainsaw is powered by a 62cc gas-fueled engine. This mid-size engine generates about 2.8 horsepower, providing more than enough power for cutting through large logs and felling trees.

The chainsaw uses a standard gasoline/oil mix to fuel its 2-stroke engine. This makes it easy to refuel as you just need to premix the gasoline and 2-cycle engine oil in the appropriate ratio. The fuel tank capacity is 15.5 fluid ounces.

Starting the NCS6200 is very straightforward thanks to the simple starting procedure. You turn the ignition switch to the 'ON' position, pull out the choke, then pull the starter cord rapidly. This pulls the starter mechanism which cranks the engine. Once the engine starts, you push the choke back in to keep it running. The chainsaw is fitted with an automatic return stopper so the starter cord retracts on its own after pulling.

Cutting Mechanism

The NEO-TEC NCS6200 chainsaw features a robust cutting mechanism designed for efficient wood-cutting. It has a 20-inch guide bar made from hardened steel, ensuring maximum durability and resistance to wear. This generous bar length allows the saw to cut wider logs and fell larger trees efficiently.

The chain itself is Oregon 95VP low-kickback chain, with a pitch of 0.325 inches. This chain is engineered for fast yet controlled cutting, with raker cutters that deliver smooth performance. The chain has a chain speed of 13.5 m/s, which gives it ample velocity to saw through wood swiftly. Overall, the long bar length coupled with the fast yet steady Oregon chain makes the cutting mechanism highly effective for demanding timber cutting applications.

Features

The NCS6200 chainsaw comes equipped with several handy features that improve performance, safety, and ease of use.

Safety Features

• Inertia chain brake stops the chain instantly if kickback occurs to prevent injury.
• Chain catcher prevents broken chains from striking the operator.
• Front hand guard provides protection against wood debris and accidental contact with the chain.

Ease of Use Features

• Tool-less chain tensioning allows quick and simple chain adjustments without tools.
• Automatic oiler provides optimal lubrication to the chain and bar.
• Transparent fuel tank makes it easy to check fuel level at a glance.
• Combined stop switch and choke lever simplifies starting.
• Anti-vibration system reduces operator fatigue from engine vibration.
• Well-balanced design with ergonomic rear handle for secure control during operation.

Comfort

The Chainsaw NEO-TEC NCS6200 20 inch has several features designed with the user's comfort in mind. The handle is ergonomically designed to fit comfortably in the hand and minimize fatigue during prolonged use. It has an overmolded rubberized grip that provides a secure, non-slip hold.

Vibration damping is another key comfort feature. The saw utilizes a patented anti-vibration system to reduce vibrations generated during cutting. This helps reduce hand and arm fatigue. The spring-loaded handle also helps absorb vibrations. Together, these features allow the user to operate the chainsaw comfortably for longer periods of time with less negative impact from vibrations.

The relatively lightweight but balanced design also contributes to user comfort. At just 12 lbs, the saw avoids being overly heavy while still maintaining stability and control during use. The weight is distributed to make the saw easy to maneuver as well. With comfort-enhancing features like these, the NEO-TEC chainsaw enables users to take on cutting jobs with greater ease and less strain.

Maintenance

The NEO-TEC NCS6200 requires regular maintenance to keep it running smoothly. Here are some key areas to focus on:

Air Filter - The air filter should be inspected frequently and replaced when dirty. A clogged air filter will restrict airflow to the engine and cause loss of power. To access the air filter, remove the cover on the back side of the chainsaw.

Chain Tension - Check the chain tension before each use. There should be only slight up and down movement in the chain (about 1/8 inches). Tension is adjusted using the side access tensioning screw. Do not over-tighten the chain as this can damage the bar.

Fueling - Use fresh, clean unleaded gasoline with an octane rating of 89 or higher. Do not use gasoline containing more than 10% ethanol. Drain the fuel from the tank after each use to avoid deterioration. Also inspect the fuel filter periodically and replace when dirty.

Regular air filter checks, proper chain tensioning, and using fresh fuel will keep this chainsaw running optimally for many jobs. Always refer to the user's manual for full maintenance procedures.

Cutting Performance

The NEO-TEC NCS6200 chainsaw delivers excellent cutting performance thanks to its powerful 62CC gas engine. The engine generates up to 3.5HP of raw power which gives the saw the ability to cut through wood quickly and efficiently.

Users report the chainsaw can rip through softwoods like pine up to 20 inches thick in a single pass. It can tackle hardwoods like oak up to 16 inches thick without issue. The saw excels at limbing, bucking, and felling medium to large trees with ease.

The 20 inch bar and chain allow you to make large cuts through thick trunks and logs. It can handle cross-cutting firewood all day long thanks to the tool-less chain tensioning system that lets you quickly tighten the chain as needed. The automatic oiler ensures the chain and bar stay lubricated during extended use.

Overall, the cutting speed and power is impressive for a chainsaw in this price range. It has no problem taking on demanding residential and ranch cutting tasks. The NCS6200 gives you pro-level cutting performance at a fraction of the cost of commercial models.

Durability

The Chainsaw NEO-TEC NCS6200 20 inch chainsaw is designed to withstand heavy use for tree-felling and firewood cutting applications. The materials used in its construction are high-quality for longevity.

The engine housing is made from a hardened plastic composite that is impact-resistant and can handle accidental drops and bumps during transport or use. The exterior also seems well-sealed to prevent sawdust and debris from entering the internal mechanisms.

The chain itself is chrome-plated and made from hardened alloy steel for strength and edge retention. Chainsaw chains naturally wear down over time, but owners report the NEO-TEC chain holds its sharpness better than cheaper chains. The chain tensioner allows keeping the chain at the optimal tightness as it stretches.

The fuel tank and oil reservoir use durable, translucent nylon construction that stands up to UV rays, gasoline, bar oil, and regular cleaning. These parts should last for years under normal use.

The metal handle and trigger materials are aluminum/steel alloys chosen for toughness and fatigue resistance after continuous sawing. The rubberized grips also maintain their traction and do not easily tear or deteriorate.

Overall, the construction quality of the NEO-TEC chainsaw is above average for the price point. With proper maintenance, it should provide at least 2-5 years of reliable service life for a homeowner. For professional use, the lifespan may be shorter, but still reasonable for the cost.

Pros and Cons

• Pros - Powerful 62cc 2-stroke engine provides robust cutting power - 20" bar and chain can cut logs up to 24" diameter - Tool-less chain tensioning makes chain adjustments easy - Automatic oiler provides steady lubrication to the bar and chain - Anti-vibration system absorbs vibration for comfortable operation
  - Quickstart technology ensures easy starts - Durable magnesium crankcase and sprocket cover for a long service life

• Cons - Heavy weight at over 15 lbs makes it tiring for extended use - Noisy 2-stroke engine - Requires mixing oil and gas for fuel - Chains need frequent sharpening and replacement - Not designed for fine detailed carving work

Overall, the Chainsaw NEO-TEC NCS6200 provides strong cutting performance for taking down trees and cutting firewood, but the noisy 2-stroke engine and heavy weight may make it less suitable for extended use. Easy starting and tool-less chain adjustments are nice conveniences, though fuel mixing and chain maintenance add to the regular upkeep. For heavy-duty logging tasks, the robust power and rugged build quality are well suited despite some drawbacks. Those looking for a chainsaw optimized for finesse carving may want to consider other options.